Location:Home >NO: GTI-GRS Information

GFRP Square Bar
Model NO: GTI-GSS
Introduction:


We accept customization of FRP pultruded profiles according to the following requirements.

●Product section:
Be able to produce FRP pultruded profiles with any cross-section

●Color:
According to your customization. We can supply FRP profiles with various colors

●Resin matrix:
The appropriate use of resin formulations is according to the operation environment of final product and usage requirement (see media properties).
The resins used in pultrusion process are mainly general purpose resin, isophthalic resin o-benzene resin, Vinyl Ester Resins, and phenolic resins.

●Reinforced materials:
It is the support frame of glass steel which largely determines the mechanical strength and elastic modulus of pultruded products.
The reinforced materials used in pultrusion process are mainly glass fiber roving , glass fiber mat and glass fiber fabrics.

Specification
Model No.編碼 Size(mm)尺寸
A B
GTI-GSS0604 6 4
GTI-GSS0906 9 6
GTI-GSS1111 11 11
GTI-GSS1208 12 8
GTI-GSS1510 15 10
GTI-GSS2009 20 9
GTI-GSS2010 20 10
GTI-GSS2020 20 20
GTI-GSS2819 28 19
GTI-GSS3020 30 20
GTI-GSS3217 32 17
GTI-GSS3220 32 20
GTI-GSS3616 36 16
GTI-GSS4615 46 15
GTI-GSS4622 46 22
GTI-GSS5012 50 12
GTI-GSS5427 54 27
GTI-GSS5823 58 23
GTI-GSS6921 69 21

Pultrusion Products

Fibre bundles and slit fabrics are pulled through a wet bath of resin and formed into the rough part shape. Saturated material is extruded from a heated closed die curing while being continuously pulled through die. Some of the end products of the pultrusion process are structural shapes, i.e. I beam, angle, channel and flat sheet. These materials can be used to create all sorts of fibreglass structures such as ladders, platforms, handrail systems tank, pipe and pump supports.

 

Mechanical Properties Related Standards Unit Measured Longitudinally
Standard Shapes  Rod & Square Bar
Tensile Strength ASTM D 638 psi 30000 100000
Tensile Modulus ASTM D 638 psi 2.3X106 6.0X106
Flexural Strength ASTM D 790 psi 30000 100000
Flexural Modulus ASTM D 790 psi 1.8X106 6.0X106
Compressive Strength ASTM D 695 psi 30000 600000
Compressive Modulus psi 2.3X106 6.0X106
Izod Impact Strength FT.-LBS./IN 25 40
Barcol Hardness 50 50
Electrical Properties 50 50
Dielectric strength ASTM D 149 VPM,min 200*** 150
Dielectric strength 1" long specimen tested parallel to laminate face shorttime in oil
KV per inch 40 70
(24 hrs. exposure)% by weight 0.75 0.75
Coeffecient of thermal 5.2X106 5.2X106
views: 3077